Completion of a Transit declaration

Box number

Box name

00

• Characters 1-8: Declarant's identificationnumber (NODI number)
• Characters 9-17: Date (yyyymmdd)
• Characters 17-22: Sequential number

Example: NO12345620131025123456

00

MRN (Master Reference Number)
Each transit operation is assigned a unique reference number (MRN).
The MRN is generated automatically when the declaration has gone through validation (input control) at Norwegian Customs. An electronic message with information on the MRN is returned to the declarant.
The MRN consists of 18 characters and has the following national structure:

• Characters 1 and 2: Last two digits of theyear
• Characters 3 and 4: Code for country of departure (ISO 3166)
• Characters 5-10: Customs office code (the 6 characters after the country code)
• Characters 11-17: Serial number
• Character 18: Check digit

Example: 13NO01018C11234567

01

Declaration status
Enter the declaration type for the transit declaration, with one of the following codes:

• T1 = Transit of goods that do not have EU status
• T2 = Transit of goods with EU status
• T- = Transit of both T1 and T2 goods (mixed consignment)

02

Consignor/exporter
Enter the consignor’s name and address (including country).
The Trader identification number (TIN) is stated when it is known.
If there is only one consignor, then state this at the header level. The box “Consignor” at the item level shall then not be used.
If there are several consignors/exporters linked to one declaration, state these at the item level. The box “Consignor” at the header level shall then not be used.

03

Forms
This box shows the form's serial number and the total number of set of forms , and it is normally defined by the declarant’s system.
Example: If a declaration is submitted with two lists of items, 1/3 is stated on the Transit accompanying document, 2/3 on the first lists of items and 3/3 on the second list of items.

05

Items
Enter in figures the total number of items covered by the declaration.

06

Total packages
Enter the number of packages covered by the item.
If the code for the type of package indicates bulk (for example, VQ, VG, VL, VY, VR or VO) or unpackaged (NE), you cannot use this box. In such cases, the “Number of units” must be stated.
In other cases, the “Number of packages” is mandatory.

08

Consignee
Enter the full name and address (including country) of the consignee. Enter the trader identification number (TIN) if known.
If there is only one consignee, then state this at header level. The box “Consignee” at item level shall then not be used.
If there are several consignees linked to one declaration, state these at item level. The box “Consignee” at header level shall then not be used.

15

Country of dispatch/export
Enter the country code (ISO 3166) for the country in which the consignment originates.
If there is only one country of dispatch, this shall be stated at header level, the box “Country of dispatch” at item level shall then not be used.
If there are several countries of dispatch linked to one declaration, state these at the item level. The box “Country of dispatch” at the header level shall then not be used.

17

Country of destination
Enter the country code (ISO 3166) for the country to which the consignment is destined.
If there is only one country of destination, then this shall be entered at the header level. The box “Country of destination” at item level shall then not be used.
If there are several countries of destination linked to one declaration, enter these at the item level. The box “Country of destination” at header level shall then not be used.

18

Identity of the means of transport at departure
Enter the registration number, registration number plate, name, etc., of the means of transport at departure (for example, the registration number for the tractor and any trailer/semi-trailer).

If the first digit in the “Mode of transport inland”, (box 26) is “5” or “7”, the box cannot be used.

Avoid the use of spaces or symbols (for example AA11111, instead of AA 11-111).

18

Nationality of the means of transport at departure
Enter the country code (ISO 3166) for the nationality of the means of transport at departure.
In cases where the tractor and trailer/semi-trailer have a different nationality, the nationality of the tractor shall be entered.

If the first digit in the “Mode of transport inland”, (box 26) is “5” or “7”, the box cannot be used.

19

Container
Enter whether the goods are being transported in a container or not, with the following code:

• 0 = Goods are not transported in a container
• 1 = Goods are transported in a container

21

Identity of the active means of transport crossing the border
Enter the registration number, registration number plate, name, etc., of the means of transport that actively crosses the border. In cases of combined transport, or when multiple means of transport are used, the means of transport that provides propulsion shall be stated (for example, when a lorry is on a ferry, it is the ferry that is the active means of transport).

Avoid the use of spaces or symbols (for example, IMO1234567 instead of IMO 12-34567.

21

Nationality of the active means of transport crossing the border
Enter the country code (ISO 3166) for the means of transport that actively crosses the border.
In cases of combined transport, or when multiple means of transport are used, the means of transport that provides propulsion shall be stated (for example, when a lorry is on a ferry, it is the ferry that is the active means of transport).

If the first digit in the “Mode of transport at the border”, (box 25) is “2”, “5” or “7”, the box is mandatory.

25

Mode of transport at the border
Enter the code for the mode of transport when crossing the border. The following codes can be used:

• 10: Maritime transport, Norwegian/foreign
• 12: Railway wagon on sea-going vessel
• 16: Powered road vehicle on des-going vessel
• 17: Trailer or semi-trailer on sea-going vessel
• 20: Rail transport
• 23: Road vehicle on rail-wagon
• 30: Road transport
• 40: Air transport
• 50: Postal consignments
• 70: Fixed transport installation (pipes, cables, etc.)
• 80: Inland waterway transport
• 90: Own propulsion

26

Mode of transport inland
Enter the code for the mode of transport inland from the customs office of departure to the office of exit from Norway.

The same codes are used as for box 25 “Mode of transport at the border”.

31

Description of goods
Description of the goods in free text. The description of goods shall only encompass one item. This description shall be specific enough so that Norwegian Customs easily can identify the goods. General descriptions such as “parts”, “general cargo”, “consolidated”, “miscellaneous goods”, etc. shall not be used.

For lists of items for mixed consignments, the T1 and T2 goods shall be specified as separate items on the list of items.

31

Type of package
Enter a two-letter code for the type of packaging the goods are packed in.
It is possible to use multiple packages codes for each item. Enter the code in accordance with UN/ECE Recommendation no. 21 (183 kB)

31

Marks and numbers
Enter the marks and number of the packages.
If the code for the f package code indicates bulk (for example, VQ, VG, VL, VY, VR, VS or VO) or unpackaged (NE, NF or NG), use of this box is optional. In all other cases it is mandatory.

31

Number and kind
If the package code indicates unpackaged goods (NE, NF or NG), it is mandatory to state the number of packages/pcs. Not otherwise used.

31

Container number
Enter the container's number. You can enter a maximum of 17 alphanumeric characters to define a container. Only one container number shall be entered on each line.

The container number is only provided if the transport includes containers (stated in box 19).

32

Item number
Number of the item. The items are numbered sequentially, cf. box 05. Also used if the declaration only contains one item. Each item number is unique through the entire declaration in an unbroken sequence.

33

Commodity code
This box must be completed when the same person makes a transit declaration at the same time as, or following, a customs declaration which includes a commodity code, or if the convention specifies that its use is mandatory.  Enter the commodity code (HS) with a minimum of six digits in accordance with the current customs tariff.

For the transit of T2 and T2F goods, the box must be filled in when the previous document contains information on the commodity code. In all other cases use of this box is optional.

35

Total gross mass
Enter the total gross mass of the consignment in kilos.

35

Gross mass
Enter the item’s gross mass in kilos.

38

Net mass
Enter the item's net mass in kilos.

For the transit of T2 goods, the box shall be filled in if the previous document shows the net mass.

40

Previous document type
Enter the code for documents concerning the administrative procedure that is prior to export to another country.

When the status (box 1) is “T2” and the transit operation has been issued in a non-EU country, the holder of the procedure must declare at least one code for “Previous document”, followed by the document’s reference in the box “Document reference previous documents”. You can enter multiple document references for each item.

The following codes can be used:

• T2
• T2F – used internally within the EU
• T2L
• T2LF
• T2ATA
• T2CIM
• T2TIR
• T2SM

40

Previous documents – document reference
Enter the number or other reference to the document. Multiple document references can be stated for each item.

If the “Previous document type” has been used, the document reference must be provided.

40

Previous documents – supplementary information
Free text box to provide supplementary information in connection with previous documents.

44

Type of documents produced
Enter the code for the document that is produced in support of the declaration. Multiple documents produced can be entered for each item.

Always provide information about the export declaration = code 830.

Use the stipulated code in accordance with the list of “Documents produced” in the Common Transit Convention.

44

Documents produced – document reference
Enter the reference number for the documents that produced in support of the declaration. Multiple document references can be provided for each item.

For document type 830 (export declaration), the reference number to the export declaration ,or a reference to exemption from the obligation to declare, shall be entered ( e.g. value less than NOK 5,000 or use of an ATA- carnet). For exemption from the obligation to declare the goods, a reference to the exemption shall be entered as free text.

The reference number to the export declaration must be stated as follows:

• Clearance number: 6 characters (for example, 040101)
• Year: 4 characters (for example, 2014)
• Serial number: 6 characters (for example, 123456)

44

Documents produced – supplementary information
Free text box to provide supplementary information in connection with documents produced.

50

The holder of the procedure                                                                                                                                       Enter the trader identification number (TIN), name (person/company) and address (including country) of the holder of the procedure.

The trader identification number (TIN) is mandatory when the holder of the procedure is an authorised consignor and a simplified procedure is used. Otherwise TIN is optional.

The trader identification number (TIN) = the registration number of the organisation, or a corporate number for a branch of a centrally registered unit.

50

Declaration place
Enter the place where the declaration is registered.

50

Declaration date
This is the date when the declaration is registered.

50

Representative
Enter the full name and “role” (job title of the employee) of the authorised representative, when he is acting on behalf of the holder of the procedure.

51

Intended office of transit (border crossing)
Enter the alphanumeric code for the customs office for the intended office of entry for each contracting party whose territory is to be transited in the course of carriage, e.g., SE603340 for Svinesund (SE). The EU is regarded as one contracting party.

If the transport is to transit other areas than those belonging to the contracting parties, enter the office of exit from the contracting parties’ as the office of transit.

If the office of departure and destination belong to different contracting parties, it is mandatory to declare at least one office of transit.

52

Guarantee type
Enter the stipulated code for the type of guarantee that covers customs duties and taxes for the goods that the transit operation concerns.
The following codes can be used for the type of guarantee:

0 – Guarantee waiver

1 – Comprehensive guarantee

2 – Individual guarantee by aguarantor

3 – Individual guarantee in cash

4 – Individual guarantee in the form of vouchers

6 – Guarantee waiver (air transport, etc.) in accordance with Annex I, Article 12 of the Convention

7 – Guarantee waiver for the journey between the customs office of departure and the customs office of transit ith Article 10.2 (b) of the Convention

9 – Individual guarantee in accordance with point 3 of Annex I to Appendix I.

If the simplified procedure is used, only guarantee type 0 (guarantee waiver) or 1 (Comprehensive guarantee) can be used. In NCTS, multiple guarantee types can be stated in the same transit declaration.

52

Guarantee reference number – GRN
For the guarantee types 0, 1, 2, 4 and 9, the "GRN" (guarantee reference number) field shall be provided.
If guarantee type 3 or 7 are used, the box “Other guarantee” shall be used.
Multiple guarantee references can be used in one transit declaration, dependent on the amount of tax on the goods covered by the transit operation.

52

Access code
For guarantee types 0, 1, 2, 4 or 9, it is mandatory to state the access code.
The access code and GRN are assigned by Norwegian Customs for the initial registration of the guarantee.

52

Not valid in the EU
Enter the code that indicates whether the guarantee is valid / not valid in the EU.

The following codes are used:

• Code 0 = No (valid in the EU)
• Code 1 = Yes (not valid in the EU)

How this is implemented in the specific software may vary. In some places this can be resolved by a check mark in e.g. a box..

52

Not valid for contracting parties
Enter by use of the stipulated country code which contracting parties (countries) to the Common Transit Convention (excluding the EU) the guarantee is not valid for.

The following country codes can be used:

• CH = Switzerland
• IS = Iceland
• NO = Norway
• TR = Turkey
• MK = North Macedonia
• RS = Serbia
• GB = Storbritannia
• UA = Ukraina

53

Customs office of destination
Enter the alphanumeric code for the customs office where the goods are to be presented for ending the transit operations (office of destination). If the consignee of the goods is domiciled in a country outside area of the Common Transit Convention, enter the office of exit as the office of destination.

53

Authorised consignee
This is an optional box that is used if the trader identification number (TIN) of the authorised consignee in country of destination is known.

C

Customs office of departure
State the alphanumeric code for the customs office of departure.

For Norwegian customs offices, the structure of the reference number is as follows (for example,Oslo NO01011A):

• Country: NO
• Location: 01
• Customs office: 01
• Unit at the customs office: 1
• Type of customs office: A

Codes for the type of customs office:

• A og B = Customs office
• C = Clearance unit
• D = Swedish customs office operation on behalf of Norway.
• E= Finnish customs office operation on behalf of Norway.

D

Control result code
This box is reserved for use by Customs at the office of departure for providing the control result at departure.

When economic operator (holder of the procedure) submits a declaration by means of the simplified procedure, the box must be filled in with a control result “A3”.

D

Time limit (date)
Enter the time limit (date) for the expected arrival at the customs office of destination.
The time limit can be set no later than 21 days after the operations was started.

The following format must be used:

• ddmmyyy: for example, 24022018

D

Number of seals
Enter the total number of seals (using numerals).

D

Identity of the seal
Enter the identity of the seal (-id).

55

Transhipment
This is information that is not entered at the start of a transit operation, but information that is linked to incidents during transport.
When goods are transhipped from one means of transport to another or from one container to another, the carrier will fill in the first three lines in box 55 of the Transit accompanying document.

If the means of transport is sealed, the transhipment cannot take place without the intervention of Norwegian Customs. The information must be certified by the customs authorities in box “F”.

If the consignee at the destination is linked to NCTS, the information on the transhipment is entered in the “Arrival notification” (IE007). The same information shall also appear on the Transit accompanying document.

56

Other incidents during transport
This is information that is not stated at the start of a transit operation, but information that is connected to incidents during transport.
This box on the transit accompanying document shall be used, e.g., when the tractor of the trailer/semi-trailer is replaced during transport. Enter the registration number and nationality of the new tractor. In such cases, the endorsement of Norwegian Customs is not necessary.
Based on the information on the Transit accompanying document, Norwegian Customs can register incidents during transport in the NCTS.

If the consignee at destination is linked to the NCTS, information on incidents during transport is enteres in the “Arrival notification” (IE007). The same information shall also appear on the Transit accompanying document.